VTX means Performance First™, and nothing says performance like the stunning VTX1800C. Powered by an 1800cc engine, the VTX1800C combines street-rod styling with the biggest mass-produced V- twin engine available.
Features & Benefits
New for 2004
The VTX™1800C is available in these exciting new color schemes: Magenta Metallic, Candy Orange Flame, Titanium Flame, and Black.
Unique Features
Show-stopping street rod styling with beautiful satin-finish cast aluminum wheels.
Minimalist-design front and rear steel fenders complement the VTX's street-rod styling.
Dragster-style seat boasts a low, 27.3-inch seat height for flat-footed confidence during low-speed maneuvers
Semi-swept handlebar design provides a comfortable, upright riding position.
Handsome chromed two-into-one exhaust system produces a deep exhaust note.
Wide, low, 130/70R-18 radial front tire enhances street-rod styling and delivers superb handling.
Aggressive 180/70R-16 radial rear tire puts the engine's awesome power to the ground and provides exceptional traction.
Large, handsomely finished 4.5-gallon gas tank with aviation-style fuel cap offers extended cruising range.
ECU-controlled, closed-loop emission control system utilizes an air injection system and three-way exhaust catalyzer to simultaneously reduce emissions of hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx). 49-state model exceeds California Air Resources Board (CARB) 2004 emissions standards and California model exceeds CARB 2008 standards.
Engine/Drivetrain
Engine is a 1795cc liquid-cooled 52 V-twin that dwarfs other production V-twin engines and hammers out immense power-106 bhp at 5000 rpm and 120 lb./ft. of torque at 3500 rpm.
V-twin engine features 4-inch cylinder bores and the largest connecting rods and cylinders Honda has ever made.
Offset dual-pin crankshaft with two primary-shaft- mounted balance weights allows a high-performance engine design while eliminating harsh engine vibration. The result: muscular power across a broad rpm range for unequaled acceleration and roll-on performance.
The 41.4-pound forged steel crankshaft uses bolted weights, reducing crankcase width nearly 2 inches and reducing crankshaft weight 8.8 pounds compared to a conventional one-piece design.
The engine mounting system uses carefully matched hangers and rubber mounts to eliminate unwanted vibration, while preserving the powerful character of the engine's V-twin design.
Each three-valve cylinder head features two large, 36mm intake valves and a huge, 45mm exhaust valve to produce optimum flow for the air/fuel charge.
Two iridium-tip spark plugs per cylinder for efficient combustion at all engine speeds.
Simple-to-service screw-and-locknut valve-clearance adjusters.
4.5-liter airbox supplies a large volume of cool, clean air to the engine.
Advanced high-pressure programmed fuel injection (PGM-FI) features 42mm-diameter throttle bodies delivering air to two specially designed Denso® 50-psi high-pressure fuel injectors. Fuel is delivered through 12 laser-drilled nozzle holes in each injector, producing an atomized fuel mixture that is highly combustible for maximum efficiency and power.
Electronic control unit (ECU) provides individual digital 3-D fuel injection and ignition maps for each cylinder, creating ideal fuel mixture and spark advance settings for superb rideability.
A unique dry-sump oiling system utilizes a closed crankcase design and places the oil tank inside the gearbox case. The result is a freer-revving engine for improved power, and a lower engine height, allowing optimum rider ergonomics and a low, 27.3-inch seat height.
Radiator with cooling fan maintains consistent engine temperature for optimum performance and long engine life.
Maintenance-free automatic cam-chain tensioners.
Reliable electric-starter system.
Primary drive gear uses a cam-type damper to minimize powertrain lash.
Sturdy, maintenance-free eight-plate hydraulic clutch with clutch-center damper assures smooth gear shifting.
Five-speed transmission with carefully selected gear ratios for relaxed cruising and exciting roll-on performance.
Shaft final-drive system provides smooth, low- maintenance operation.
Driven flange design at the final drive gear eliminates final drive noise and wear, and simplifies rear wheel installation.
Chassis/Suspension
Massive tubular steel frame contains the engine's power and gives the VTX a long, low, muscular stance.
Large, 45mm-inverted front fork provides 5.1 inches of plush yet responsive wheel travel.
Dual chromed rear shocks have 3.9 inches of wheel travel and feature an advanced internal valve system for a comfortable ride.
The VTX's braking system features two three-piston front calipers and a single two-piston rear caliper. Rider application of the front brake lever activates the two outer pistons of the front calipers. Application of the rear brake pedal activates the two pistons of the rear caliper and the center pistons of the front calipers. When only the rear brake pedal is used, an inline delay valve smooths application of the front caliper center pistons.
Additional Features
Distinctive, chrome hooded-headlight housing features a powerful, 55W/60W halogen bulb with a computer-designed multi-reflector for superb lighting in all conditions.
Tank-mounted chrome nacelle houses the fuel cap, tripmeter/odometer reset and indicator/warning lights for the turn signals, high beam, neutral indicator, low fuel level, oil pressure, coolant temperature, and fuel injection.
Extensive chrome finishing of engine parts includes cylinder head covers, valve inspection covers, spark plug covers, airbox cover, left crankcase cover, clutch cover and left-rear engine cover.
Silver-finish on crankcases and cylinders with milled fin edges completes the custom look.
Large speedometer with easy-to-read numerals.
Comfortably padded large-diameter handgrips with polished aluminum handlebar switch-housings and triple-clamp assembly.
Reliable, 300-watt alternator.
Durable, maintenance-free battery.
Handlebar switches and controls use internationally approved ISO graphic symbols.
Convenient push-to-cancel turn signal switch.
Transferable one-year unlimited-mileage warranty; extended coverage available with a Honda Protection Plan.
Assembled in Marysville, Ohio.
Ownership includes one-year complimentary Membership in the Honda Rider's Club of America™. Benefits include discounts, travel benefits, roadside assistance and much more. For HRCA® details, call 1-800-847-HRCA.
Available Accessories
Touring Accessories: Custom Windshield.
Chrome Appearance Accessories: Backrest with Pad (available in tall and low styles), Deluxe Backrest with Pad, Deluxe Backrest Trim with Emblem, Rear Carrier, Deluxe Rear Carrier, Backrest/ Rear Carrier Mounting Brackets, Driveshaft Cover, Rear Fender Panel.
Billet Appearance Accessories: Passenger Floorboards, Backrest Trim, Master Cylinder Cap, Front Caliper Cap Set, Rear Caliper Cap, Oil Dipstick, Spark Plug Covers, Driveshaft Bolt Covers, Timing and Crankshaft Cover, Clutch Cover, Countershaft Cover Trim, Upper Countershaft Cover Trim, Swingarm Pivot Cover Set.
Additional Accessories: Headlight Cowl, Lower Cowl with Windscreen, Cycle Cover.